EcoPrimer™ is a core shell acrylic modified alkyd emulsion with bio-based primer. EcoPrimer™ provides good adhesion, salt spray resistance, and extremely low VOC. EcoPrimer™ has a fast drying time (20-30 minutes dry to touch). Its water-based formulation makes it easier to comply with environmental regulations governing solvents and VOC limits. Clean up is easy by using soap and water.Features:
• 30% bio based
• Water-reducible
• VOC compliant
• Fast drying
• Excellent adhesion
• Extremely low VOC
EcoPrimer may be applied by spray or brush. A film thickness of 1.5-4.0 dry mils (37.5-100 microns) is recommended. The coating dries to touch in 20-30 minutes; however it takes approximately one week before the coating is fully cured. Topcoats can be applied between 30 minutes and 8 hours after the primer is applied, depending upon the type of top coat and the drying conditions.Metals Protected:
• Carbon steel
• Stainless steel
• Galvanized steel**
• Aluminum**** A wash primer such as VpCI®-373 green applied at 0.5-1.0 mils (12.5-25 microns) is recommended before applying the EcoPrimer to these substrates.
EcoPrimer is available in 5 gallon pails (19 liters), 55 gallon (208 liter) drums, or 275 gallon (1040 liter) totes.Do not allow product to freeze.
View Product Data Sheet